Trail 350 owner manual
Recreational forest trails only. This model is not intended for jumps or downhill riding. Check the front suspension for damage or leaks; obtain component-specific service instructions before adjustment.
Model specifications
| Model code | EB-T350 |
|---|---|
| Intended use | Recreational forest trails; not downhill riding or jumps |
| Frame | Aluminium |
| Gears | 10 speed derailleur |
| Brakes | Hydraulic disc |
| Tyres | 29 x 2.25 inch |
| Fork | 100 mm front fork |
| Weight | 14.8 kg |
| Maximum total load, including bike, rider and cargo | 120 kg |
| Sizing | S: indicative rider height 155 to 168 cm; M: indicative rider height 166 to 179 cm; L: indicative rider height 177 to 190 cm |
| Included lights | No |
| Included mudguards | No |
| Rear rack rating | No rack included |
| Battery | Not electric |
| Motor | Not electric |
First use and fit
The shop states that bikes are assembled and checked for collection. Verify size, saddle position and safe operation with staff before riding. Rider-height guidance is indicative and cannot replace a fit check.
Before every ride
- Check that both brakes stop the bicycle reliably before joining traffic.
- Check the tyres for damage and inflation. Use the pressure range printed on the actual tyre sidewall, not an assumed universal value.
- Check that wheels and other visible fasteners are secure, with no unusual looseness or damage.
- Check the steering, saddle and controls for secure fit and comfortable reach.
- Check lights and reflectors where required for the conditions; check any carried load is secure.
If brakes, steering, wheels, folding joints or electrical parts appear unsafe, do not ride. Ask a qualified bicycle mechanic to inspect the bike.
Care and maintenance
- Clean with a soft cloth and gentle products; avoid pressure washing bearings and electrical connections.
- Keep the chain clean and lubricated appropriately, wiping off excess lubricant.
- Inspect tyres, brakes and drivetrain regularly, especially after wet rides or heavy use.
- After a crash, impact or suspected component damage, stop riding until the bicycle has been checked.
- Do not use unverified torque values, replacement parts or adjustments. Have a workshop confirm component-specific instructions.
Common issues
| Brake feels weak or rubs | Do not ride until braking is safe. Ask a workshop to check pad wear, alignment and the correct brake type. |
|---|---|
| Gears skip or chain slips | Reduce load, stop safely, check for obvious damage and arrange a drivetrain adjustment. |
| Tyre repeatedly loses air | Inspect the tyre and inner tube or seek a puncture repair. Do not ride on a flat tyre. |
| Wheel, frame or steering damaged | Stop riding and have the affected parts examined before use. |
Service and assistance
Use the Everyday Bikes servicing page for published service packages and pricing. Parts or additional work require a separate quote. For warranties and returns, consult the shop policies.
For unknown component specifications, including torque settings, tyre pressures, brake-fluid type and charging limits, ask qualified staff rather than using an invented setting.